How is the safety of the hand brake ensured?

• The rear brake pads must be inspected every 10,000 km and replaced if they are worn out.
• The number of hand brake calipers ranges from 5 to 7, it must be noted and if it differs from that, it is changed by adjusting the screw that is located between the brake stick and the brake pads.

• In the event that the brake pad has been raised for a long time, the car must be checked and to make sure that the lining is not in the lining and replace it if it is worn out.

Brake malfunctions and how to treat them .

• The performance is irregular. The brake fluid must be checked and to make sure that there is no leakage in the brake fluid, and it can be fixed by making a lining for each brake and connecting the disc properly.
• If the brakes fail to do their job, the springs and bolts can be replaced and tightened properly.
• The brake performance is poor. There can be wear on part of the parts, which works to weaken the thread between the lining and the disc.
• The parking brake arrives at the other more than usual, although it is set. This indicates that there may be a malfunction in the brake cylinder that pumps the oil, and the problem is resolved by cleaning or changing the valve.
• The car does not stop when the brakes are applied, there may be air inside the brake circuit or a valve is clogged, the circuit must be reset.
• Heat in the brakes when the car is running. This heat is generated by friction due to the lack of sufficient clearance. The brakes must be reset.
• A whistling sound when using the brakes indicates that there is abrasion in the brake lining and its friction with the brake disc.
• The brakes ignite spontaneously. This may happen due to the mixing of brake fluid with another fluid. This problem is solved by replacing the leaking parts, cleaning the new ones with alcohol, and filling them again with new oil.