How to clean the radiator

What is a radiator?

It is a heat exchanger that transfers heat from liquid to liquid or from gas to another and is used in internal combustion engines, so it is used in the car for cooling and this process is done by passing cooling water on the engine body from the inside and then to the radiator body to be cooled through the fan .
Why should you clean the radiator?
The deposits accumulate in the cooling cycle over time, even if the customer is keen to use anti-freeze. These deposits may lead to corrosion of the cooling pipes and hoses, and this may cause blockage of the cooling paths, which may lead to an increase in the temperature in the car, especially at the engine. First, you should try to use tools Available in case of failure, the radiator must be cleaned .
Before Altzi process q
you must first drying the radiator of your cooling liquid because the old is contaminated and also can be poisoned and must get rid of it permanently .

How to clean the radiator?
Before starting the cleaning process, make sure to stay away from the car’s electricity so as not to touch the water to avoid damages that may occur as a result. .

First, clean the radiator.
The hoses connected to the radiator body are removed. The coolant inlet and outlet hoses are often the upper hole being the fluid entry hole and the exit hole the lower hole.
The hose is installed in reverse to the natural flow of water, meaning that the hose is installed in the outlet hole of the liquid, the water is opened through the water control valve and noticing the water that comes out, you will find the water is polluted at first and its color is abnormal, then it becomes clear and pure after a period of water flow. But before this process, a chemical is placed for a period of time. This substance works to break up the impurities that may be stuck to the radiator body from the inside. These chemicals clean the cleaning process.
 
Reverse the direction of flow Reverse ‘s Flushing .

It is preferable that the cleaning process be outside the car so that it is done accurately and all impurities are safely
 
removed. Cleaning the radiator fins. The radiator fins
are cleaned using a nylon brush, not a wire, and they are cleaned gently, and it must be ensured that the tracks are free of impurities so as not to hinder the cooling process as well .
Clean water paths inside the engine   Flushing Engine Block

 The engine body is also cleaned from the inside, especially the cooling water paths, the hose is disassembled and the water is opened in the opposite direction as well, and the water leaving the engine is monitored and its color until the water becomes pure and the water is closed.
After making sure that the refrigeration cycle is completely clean, the hoses are installed and everything is put back in place, with tight connections so that there is no leakage in the cooling water.
The user must also use green water suitable for the type of radiator and not use regular water because over time it will form sediments and block the water paths.