Have you noticed that the headlights of your car do not illuminate your way? I feel like it needs some tuning but didn’t have the time for it? If your answer is “yes”… Here, dear reader, is this report:
Adjust car headlights yourself with these steps:
First: you have to put your car on a flat surface, then empty the trunk of any excess loads as much as possible, make sure that the tire pressure in all tires is correct.
Second: In the second step, park your car on level ground, 3 to 4.6 meters from any wall in front of you or the garage door, be careful not to turn on the high beams or fog lights, and mark the horizontal and vertical center lines the height and direction of the light on the wall with tape, creating a letter. T ” on the wall or garage door.
Third: Return your car to a distance of 6 to 7 meters from the wall, then turn off the headlights and loosen the adjustment screws, which are usually adjacent to the lights. In this step, the adjustment screw should be, one of which is in the front of the lamp for vertical adjustment and another on the side of the lamp for horizontal adjustment.
Fourth: In this step, adjust each lamp separately by covering one of the two lamps when adjusting the other, and inspecting it well, and it is preferable to help your colleagues to sit on the driver’s seat while doing the adjustment process while the lamps are turned on and off
Fifth: Turn the top screw to adjust the direction of the vertical light. This is supposed to be done by turning the adjusting screw clockwise, and adjust the lighting in the appropriate direction, then turn on the headlights during and after adjustment and look at the light pattern on the wall. The center of the light should be centered with or below the center of the strip line you made.
There are no reviews yet. Be the first one to write one.