Learn about brake malfunctions and how to fix them

Car brakes are among the important and essential parts of every car. Without them, you will not be able to stop the car, especially in the event of a problem. Today, it is possible to learn about brake problems and how to fix them through this article.
 
Car brake malfunctions

It is possible to detect malfunctions in the car brakes through many steps, including the following:

• Check the brake fluid, where this is done by opening the engine cover and looking at the reservoir in which the brake fluid is located, and in the event that there is a small amount of brake fluid, it is evidence of corrosion in the brake pads or there is a possibility of a brake fluid leakage, and it is better to work Change the brake cylinder if there is a problem with it.
• Changing the brake pads where the oil is returned back to its reservoir after changing the brake pads and it is possible to pour new oil in the event that there is no problem or leakage, and it is better not to pour oil on the car body, and if this happens, it is better to put water immediately So as not to affect the car paint.
• Ensure that there is no filtering in the brake oil, as the person must know how to look at the car brakes and make sure that there are no problems with them. That place and work to change and repair the damaged one and get rid of that problem quickly.
• Vibration of the brake pedal is evidence that the contact surface between the brake drum and the sock is uneven, and it is best to detect the front brake disc as well as the drum in the back, and it is also better to detect the four tires in the car and in case of damage to the brake pedal Which of them is better to be changed immediately.
• The brake pedal is not affected by the brake pedal, where if the vehicle speed is not affected by pressing the brakes, and here that case is called the sponge pedal, here the pedal is exposed to the presence of air, and here the brake is pressed several times with the pressure installed in order to allow the brake fluid to exit from the ports until it comes out air with him.
• A change in the car’s paint is clear evidence of a leak in the brake fluid in the car, and here it is necessary to work immediately to fix the problem so that it does not face bigger problems in the future.
• Changing the course of the car while pressing the brakes, and here the brake cylinders of the four wheels are checked, it is possible that there is a defect in one of them or that the tire of one of the wheels has been subjected to wear and other incoming problems.
• The rims get hot after driving for a while, and here it is better to refer to the maintenance centers in order to detect the malfunction and that there is no problem with the brake lining with the leveling of the surfaces.
• A whistling sound emerges when pressing the brakes when driving, especially in winter and cold weather, and water drops form on the friction surface, which rust occurs.
• The sound of a muffled metal ticking when using the brakes, and here it is possible that the screws connecting the brakes have been loosened, and here they must be detected early and repaired immediately so that the owner of the car does not face a problem.
• The brake pedal reaches the end where this happens when there is a leakage in the brake pressure, here there is a smuggling abroad in the brake oil, and it is possible that internal smuggling occurs due to the occurrence of corrosion in the surface or if the pressure piston is subjected to wear.