With these steps … you can scan for any faults in your car computer

With the great technological progress witnessed by the world of cars during this period, the secret of many malfunctions lies in the car’s computer, so we find the computer scanning process is one of the most requirements in car maintenance centers.

Therefore, Mallaky website offers a set of steps through which a complete survey of any car computer malfunctions can be done on your own without wasting time and effort in cumbersome maintenance centers.

But before we talk about these steps, we must first point out the importance of performing these steps in the following order, because any malfunction in that may lead to serious consequences and malfunction in the car’s systems,
as this method works to unload wires and electronic devices from negative charges and erase old errors that is still stuck in the car computer and after doing this you will feel the difference

Steps for clearing errors on the car computer

1. First , place the power switch on the situation Eontakt Off  and Achglh.

2 – In the next step, we separate the negative wire from the negative battery terminal, and then we disconnect the positive wire from the positive battery terminal.

3- In the third step, we remove the battery completely from the car, so as not to touch one of the battery fingers, which leads to damage to the sensors, and this step is one of the most important steps that we must attach special importance to.

4- We connect the negative wire to the positive wire.

5- We reconnect the negative wire with the positive wire of the battery tightly, and then we ask another person to open the switch and then close it three times in a row between each opening and closing for an estimated period of 10 seconds

6. We put Swish again in shutdown mode  Off and leave it closed.

7- Reinstall the battery in the car and put the negative finger back in its place and the positive finger in its positive place.

8- Open and close the switch 3 times, then start the car.

In general, these steps These steps work to record many solutions to many malfunctions and problems in cars, and there are models that may ask you to code the cassette and reset the car windshield after unplugging the battery completely.