How to minimize damage from speed bumbs and potholes

Damage to industrial bumps on the car is one of the things that concern the motorist the most, especially after it spread on the roads, an attempt by traffic to control the speed of cars on various roads. during this article.

Damage to industrial bumps on the car

Despite the necessity of the presence of industrial bumps, they cause a lot of damage to the car in addition to accidents, as some bumps are designed with specifications that do not conform to international standards, as well as there are many motorists who pass those bumps wrongly and at high speed, the damages are In the following points:

• Cause car shears to break.
• Engine bases are damaged.
• The shock absorber was also broken and damaged.
• The car displays a loss of balance, which results in its deviation to the right or left, in the sense that it deviates from the lane, and sometimes overturns.
• It also leads to damage and breakage of the car exhaust.
• Steering wheel box damaged.

Avoid industrial bumps damage

Given the importance of the presence of bumps on various roads and after we learned about the damages of industrial bumps on the car, they can be avoided in order to preserve the car as follows:

The driver should exercise extreme caution while driving on the road and pay attention to the directions placed on the roadsides.

Do not try to apply the brakes when you are surprised by the presence of artificial bumps, as it will have counterproductive results, but the correct behavior is to hold the steering wheel well and take care not to swerve the car.

One of the best ways to bypass industrial bumps is to cross it transversely, meaning climbing the car on the bumps in the front tires, then working to rotate the steering wheel in a semi-circle in order to climb the two rear tires, and then walk forward, which is the ideal way to overcome bumps properly.