Checking the condition and level of brake fluid in the master cylinder Checking Master Cylinder Fluid Level and ConditionThe brake fluid level and condition must be checked at least twice a year following the vehicle’s preventative maintenance plan. The driver can, when performing any engine maintenance, by looking at the brake fluid level inside the reservoir in the event […]
Wheel AlignmentFailure to adjust the wheel angles leads to problems with steering, vehicle stability, tire wear, and increased fuel consumption.Classification of wheel angles: There are many wheel angles in the car, which can be divided as follows:A- Front wheel angles and rear wheel angles. B – adjustable angles and fixed (non-adjustable) angles.c- Angles specific to the inclination
examined the servo servo brake Checking the Power Brake BoosterIn most cases , maintenance servomotor are examined me and dislocations LED unidirectional and the work of dismantling and change consoler Elly or LED or servomotor.Most of the problems with the servo come from motorists’ complaint that brake performance is poor or unsatisfactory. And occasionally, the complaint is about continuous brake loading,
Brakes for heavy vehicles (trucks and buses): Air Brake System The force of the hydraulic brake system is not enough to brake heavy vehicles with the driver’s force or the servo force, but a source of the acting force other than the driver is needed. This can be provided by compressed air, and the force acting on the wheel
checking and adjusting the brake pedal Checking and Adjustment of Brake Pedal The pedal plays a large role in the performance and operation of the brakes. It must be at a specific height. In the event that it is in a high position, this requires a longer time to press the pedal, and the sensitivity of the pedal
