The center of the low beam headlights should illuminate the road 30 meters in front of the vehicle, with the left beam directed forward and the right beam directed slightly deviated to the edge of the road. The high beam headlights are directed just below the horizon. Adjusting the lights can be fine-tuned by professionals, but you can do it yourself. First, make sure that the tire inflation pressure is correct for all wheels, and that the car is loaded with the usual load for it. Park the vehicle on a level road 25 cm from a vertical wall or garage door. Light the dipped beam headlights and then mark on the wall, with a pen or tape, the center beam of each headlight. Put the car back 7.5 metres. Each spotlight has two screw adjustments, one screw up or down and one screw on the side; To adjust the beam, screw in or loosen the screw. Set each ray 5 cm below the horizontal line: the left ray is vertical down; And the right is 5 cm to the right of the vertical line.
There are no reviews yet. Be the first one to write one.