
Many car users mishandle it, especially in the summer, due to the high temperature, which puts a heavy load on the engine and the car in general.
Some of these errors may cause damage to the car in the long run, which also disrupts the engine, so in this article we will talk about some errors and how to avoid them.
Cooling water:
Engine cooling is one of the most important reasons for improving engine efficiency. This process is done with water and air, so the water level must be checked because the low level of cooling water increases the engine temperature, which endangers the car. It is better to use green water because this type of water Good in cooling process.
engine oil:
Choosing a good type of engine oil is one of the important steps to protect the engine from wear resulting from friction, so you should check the oil rate in the engine from time to time, especially after driving the car for a long distance in high temperatures.
As the lack of oil in the engine causes friction between the internal parts, which causes wear and damage to the engine parts in the long run.
car conditioning:
The use of air conditioning in the summer is a basic and natural thing because it is used to cool the salon, but the air conditioner must not be turned on while the car is traveling at high speeds because this contributes to engine damage.
Therefore, the air conditioner and the car must be run at slow speeds, or it is better to turn it on before starting the movement, because this puts a load on the engine.
It is also better to run the air conditioner on the first speed and then gradually increase the speed if necessary.
Parking in the sun:
The car should not be parked in a place exposed to the sun for long periods of time, because this makes the process of cooling the car salon difficult and requires a longer period of cooling.
The sun also leads to the removal of car paint, and it also causes corrosion of plastic parts and tires.
fuel tank :
The fuel tank should not be filled to the full in the summer so that the pressure resulting from evaporation inside the tank decreases due to the high temperature.
There are no reviews yet. Be the first one to write one.

