With the advent of the summer month, many types of trees fall from gum, especially the coniferous family, which leave an inappropriate imprint on cars, especially if they dry out in the case of parking under trees, and resorting to traditional methods of gum removal leads to unsatisfactory results, You shouldn’t use abrasive cleaning methods because they will scratch the car, so there are some methods that have already shown satisfactory results when used to remove glue from the car.
Steps to remove the glue from the car paint
The place must first be washed with soap and water, taking into account the cleaning of the area completely, making sure not to use any means to scrape dust and dirt, only use a cup of warm water.
Then comes the step of heating the glue through the use of a hair dryer, which in turn helps to soften the glue and make it easier to remove.
Using a credit card that helps scrape off the glue, by placing a credit card on the car at a distance of 2.5 cm from the glue at a 45-degree angle, and working to pass it continuously until the layer of glue is removed, paying attention to the car paint during the scraping process.
After that comes a heating step for the glue in case there is still a quantity of it still removed.
Then we wash and wax the area that was scraped, which can cause the glue stain to remove the transparent layer that is on the car, so this layer must be washed and left to dry, then we add a layer of wax to it.
There are no reviews yet. Be the first one to write one.