How to choose the right car oil filter

Oil plays an important role in keeping your vehicle running smoothly. It not only lubricates engine parts and reduces friction, but also helps remove heat. Over time, the oil naturally degrades. It also captures fine particles and even mineral shavings from the combustion cycle. The oil filter prevents these particles from returning to the pump or engine

The filter is also important in maintaining oil pressure. Using the wrong oil filter can negatively affect the oil pressure. A faulty filter, a filter that is not working properly, or a clogged filter may cause low oil pressure. A proper oil filter, along with a pressure relief valve, will help regulate oil pressure and avoid pressure surges. If the relief valve is damaged, or the wrong filter is used, too much or too little oil can pass into the engine.

Using the wrong oil filter can prevent the filter from sealing properly, resulting in oil pressure problems or leaks. We have even seen cases of literally incorrect oil filters falling off. Not only will oil spills make an ugly mess in your driveway, if your engine runs out of oil, the damage can be catastrophic. The engine can run dry, and without oil to help displace the heat, it can cause your vehicle to overheat. Without reducing friction, engine parts wear out and strain the cooling system. Unfiltered particles can travel to the engine’s interior and mineral deposits can hinder heat conduction.

Warning signs of incorrect or imitated oil filters

• Performance: Engine performance will deteriorate and you may lose acceleration
• Pick up: Your car may break down while driving and you may have trouble maintaining speeds
• Metal squeak: If you hear the sound of metal grinding against metal, it may be due to a lack of oil in the engine
• Oil pressure dips: The oil pressure gauge can move around a bit normally, but if you notice a quick dip, that’s a warning sign
• Black exhaust: If the oil does not pass through the filter properly, you may smell burning oil as it passes through the exhaust pipe, resulting in a black or dirty exhaust.
Even a faulty oil filter can seem to fit. Just because the threads line up and appear to be installed correctly, that doesn’t mean they are the right kind. An incorrect rubber seal on the oil filter may not line up and lead to oil pressure problems and leaks.
It is important to check your owner’s manual or the vehicle manufacturer’s website to make sure you are using the right

Car oil is one of the important things that protects engine from being damaged , in the oil filter there is a side valve where this valve works to bypass The oil does not stop and does not expose the engine to lubrication. It is better to change the engine oil every period so that it does not form particles that are deposited on the engine and thus affect it and completely break down.

Choosing the right car oil filter

There is one preferred way to determine if this filter is suitable or not is to refer to the catalog, as one of the things that is very important for the car is to choose the appropriate filter for it in order to maintain the engine, as the differences between them are simple in the size of threads and gaskets. In general, they are very similar. Choosing the wrong filter will result in oil leakage on the engine and thus cause problems in the engine, and among the most important signs that distinguish the original filter are the following:

• Filter pieces and filter materials to be compared, folded and spread.
• The original filter has a greater weight than the non-original filter. By checking the filter, if it is smaller in diameter, this means that it is not original.
• The center tube in the original filter is finely crafted and durable, when using the flash light this center tube can also be seen inside the oil filter.
• The original filter does not rust, unlike the imitation filter, after a period of use it rusts.
• The writing on the original filter is clear, unlike the other filters.

Methods and steps for changing car engine oil

• Preparing the equipment, before starting to change the oil comfortably, make sure that all equipment is available and a container to put the old oil in, and buy another new oil of good quality, as well as the availability of the jaw, linkage and suppression keys, and the wheel lift so that you can easily get down under the car.
• Heating the oil, it is preferable to run the car for a quarter of an hour before starting to change and then stop it, as this works to get rid of all the impurities in the old oil, but in the case of cold oil, these impurities descend very slowly.
• Disposal of the used oil, where the old oil is placed by placing this container at the bottom of the oil outlet. After that, it is done by the jaw wrench to loosen the oil outlet with the hand away from the oil exit because it is hot and this process takes a quarter of an hour, the oil cartridge is washed before connecting the lower parts In the car.
• The oil filter is located under the car, and sometimes under the engine hood, the filter is removed and the oil is placed in an old glass container, then after putting a small amount of old engine oil in the new filter and then put the new oil, and it must be ensured that the oil reaches the appropriate level between the minimum sign and the maximum sign.

The importance of replacing and changing the oil

• Because of the heat, the components of the oils change, and this is normal, as the degree of viscosity is lower, and therefore the wear increases in the machine due to the increase in friction and the small amount of oil present. Therefore, care must be taken to provide the appropriate amount of oil to lubricate the existing parts and avoid problems with the engine.
• The oil absorbs gases, dust and water resulting from the combustion process, and if it does not dispose of them and absorb them, they cause rust in the engine and remain stuck in the oil, and thus lead to major car malfunctions and problems.