Know Your Car

The Suspension:– The first priority of suspension design to carry the vehicle weight.– Provide an elastic connection between load carrying systems and the axles or wheels.– Damp their vibration.– Adjust the position of the automobile body in motion (hold the wheels and their support in proper position during acceleration, braking and turning).Suspension geometry is to

Brake Pad ReplacementCar wheel solution:a- Use a wheel wrench and remove the wheel bolts.B – Lift the car on the jack (make sure it is stable on the jack).c- Loosen the calf screws according to the jaw arrangement Figure (1).  Figure (1): Dissolving the wheel from the car  Checking the thickness of the friction bushings:The

: Inboard brakeTo improve the work of the suspension system in the car, the location of the wheel brake has been changed in the car. This technique is applied so that the friction brake does not use the wheel-mounted brake to perform its task as it is applied in most cars. Instead, the brakes are installed

New systems to improve the brake performance of theNew Systems to Enhance the Brake Performance brake force distribution system ElectronicallyElectronic Brake-force Distribution (EBD) is a system that works to change the amount of brake force acting on each wheel, based on the road condition, speed, load .. etc. Often combined with an ABS system, the Electronic Brake-force Distribution system can increase brake pressure on