In simple steps .. learn how to clean the car exhaust at home

A dirty exhaust port is one of the annoying things that cause many car malfunctions, including poor engine torque.

In this regard, one of the car experts offers a set of simple steps that can be used to clean the car’s shank and return it to its new condition at home.

Steps to clean your car at home:

1- First stage:

At first, the car body should be sprayed with water to remove suspended sediments from carbon and others, then the water is mixed with tire soap, and sprayed inside the car body from the inside and outside, with brushing for two minutes.

2- The second stage:

In the next step, the water pump is re-washed again with pressurized water, but be careful not to get water on the inner housing and the entire exhaust system, then it is sprayed again with soap and rubbed with steel wool.

3- The third stage:

 In the next step, the sheath is sprayed until it is completely dry, then the polishing stage is done by placing an amount of steel polish on a tire wash cloth, and it is completely rubbed in the sheath from the inside and outside.

4- Fourth stage:

This is the most important step, during which two or three layers of tire protection cream are applied to the exhaust pipe, thus the cleaning process is over.