How do you know if the cooling water pump in your car is damaged?

One of the most important things that help you to protect your car from damage is to do regular maintenance on it, so that you get the highest benefit from the car and increase its life span.
One of the most important things that must be maintained and taken care of is the cooling water pump, as it plays a major role in protecting the engine from overheating by pumping water into the engine parts in certain tracks. This water absorbs the temperature and keeps the engine temperature at a safe level.
If the cooling water pump is damaged, it may destroy the engine, especially when the owner does not realize that the pump is out of order, and in this article we will learn about the most important signs of pump damage.
First the cooling water leakage:
Coolant runs in paths and passages inside the engine to reduce its temperature, which is 4,500 degrees Fahrenheit, while the fluid inside the engine absorbs heat and cools it. Then the liquid comes out to be cooled in the radiator by atmospheric air and the fan, and thus the liquid is cooled again.
A leak in the coolant indicates the presence of a hole or a defect in the cooling water pump or in one of the water paths, and this must be detected.
Second: Damage to the pump wear and noise from it:
It may happen and you hear a noise in the engine area, these sounds are issued when the water pump is damaged by water. This damage leads to noise as a result of the difficulty of rotating the pump motor, and this sound must be checked as soon as possible.
Third, increase the engine temperature
When the pump is damaged, this leads to a decrease in its efficiency, which makes it not perform its main task, which is to cool the engine, and this raises the engine temperature in a noticeable way, even when the car is traveling for short distances.
Fourth, fumes rising from the radiator:
If you see fumes rising from the radiator, this indicates that the cooling water temperature is very high, due to the stoppage of water movement, as the function of the pump is to stir the water inside the cooling system. This flipping results in a lower water temperature.