All you need to know about the exhaust kit.. “Car Shacman”

The exhaust is considered one of the important parts attached to the car engine, so that it expels the exhaust gases and transfers them to its rear, in addition to cooling the exhaust and reducing its sound so as not to cause inconvenience to others.Our topic consists of

How can the effect of these acids be reduced, what are the causes of exhaust leakage, and how can these causes be overcome. Sometimes we find smoke or fumes coming out of the smokehouse, unnaturally, what are the causes, is the difference in smoke color a sign, tips to avoid ignition of the smokehouse by following the following:

The exhaust pipe is connected via a flange, usually to the exhaust manifold, which in turn is connected from the side to the cylinder head.
 In all cars, the exhaust assembly must fulfill two requirements:
1: To expel the exhaust gases into the atmosphere as quickly as possible.
2: To reduce the sound of the exhaust so that the pedestrians on the road are not harmed by annoying sounds. 
The first requirement can also be partially fulfilled by cooling the gases as much as possible, and to avoid stopping the flow of gases. Therefore, the exhaust pipe in the car must be as long as possible so that it ends at the rear. In addition, there are several additional requirements imposed by the design of the exhaust assembly.
The silencer is located within the exhaust pipe, which must have a sufficient internal diameter. The main function of the silencer is to expand the gases to a large extent by increasing the cross-section of their passages (ducts). The silencer includes, according to its model, guide beams and perforated grilles, the function of which is to reduce the vibrations of the leaking gas column, and to achieve a significant reduction in sound.And about the reasons that lead to the malfunctions of the suction cup is the exposure of the internal wall of the suction cup to (oxidation) processes as a result of its exposure to the exhaust gases resulting from the combustion of the air-fuel mixture.. The result of this combustion with the water vapor present in the exhaust is sulfuric acid, which is characterized by the property of rapid corrosion of metals.

• How can the effect of these acids be reduced?

In the beginning, the driver must be keen on heating the engine when starting, especially in the winter.. Also, the gas pedal must be pressed quickly several times in a row before stopping, parking and disengaging the engine, and this process helps to expel a large part of these acids before stopping the car and leaving it.

• What are the causes of exhaust leakage?

Exhaust leaks may result as a result of not tightening the connections and parts of the intake manifold well, or over-connecting, especially the link between the first end of the
intake manifold and the first place of contact between it and the motor, which is called the ‘lip’ (manifold) and this leads to a softness of the connection and thus exhaust leakage.
Another reason is that this ‘lip’ is small or large so that it does not do a good seal and prevent exhaust leakage, and there is a third reason which is that the tires of the suspension suspension are of a poor type, or that the wire attached to the shackles leads to inflexibility and easy breakage with any vibration. for the car.

• How can these reasons be overcome?

When the car driver chooses a “tire” for the suspension, he must make sure of its quality, in addition to selecting the good connections so that sufficient flexibility can be given to the shocks’ vibrations.
What about exposure to water while walking or washing the car?
This certainly helps to speed up the consumption of the suction cup, as it is in a state of heat. When exposed to water, this helps to oxidize the metal and thus the speed of its consumption, so the driver of the car should be careful to stay away as much as possible from water sources and not expose the outer surface of the sump to any sources of water while it is hot.
There is a very important point, which is that the consumable parts of the shaman must be replaced with parts of the original type and in conformity with the technical specifications of the car. Searching for the cheapest may lead to more financial cost after a while.

• Sometimes we find smoke or fumes coming out of the smoke in an unnatural way, what are the causes?

Emission of smoke or fumes is evidence of a problem with the car. To determine this problem, it is necessary to determine the color and location of the smoke exit.

• Is the smoke color difference significant?

Certainly, if the smoke coming out of the shutters is blue, the reason is the combustion of the engine oil inside the fire chamber. In this case, the shutters must be re-adjusted and tightened.
But if the smoke coming out of the exhaust is black, the reason for that is the increase in the proportion of fuel in the mixture, that is, the ratio of gasoline to air.. This mostly happens as a result of not adjusting the carburetor or increasing the pressure of the gasoline pump, or there is a blockage in the air filter. In this case, it must be Clean or replace the air filter and repair and adjust the carburetor.
 

Tips to avoid ignition of the smokehouse by following the following:

When installing or changing the pump box, we recommend installing original boxes.
 The engine oil must be checked and repaired immediately when there is any malfunction that leads to a shortage of oil.
Keep the engine running settings by adjusting the spark plug (ignition timing adjustment) as well as the engine faucets.
 Ensure that all the car’s power cables, especially the ground, are completely connected to the car’s chassis.
 Cars, especially modern ones with catalysts, must be stored away from any flammable objects.